FKC-I浮游细菌采样器，为国内首款彩屏浮游细菌采样器，产品按照我国新版GMP规范要求，并参照国外同类产品进行设计制造。它具有下列特点：
•采集口为397目，直径φ０.７mm微孔，减少了细菌重叠，降低了微生物计数错误。
•可编程，采样量从1-6000L任意设定。
•采样流量大，减少采集时间。
•彩屏显示采样量，采样时间等参数。
•采样量，采样时间等参数按页储存。
•自主研发采集芯片，采样流量更稳定。
•更换培养皿简便，拿下采集口即可更换培养皿
（使用标准通用培养皿φ90×15）
二、浮游菌采样器技术指标：
1，采样头为阳极氧化铝制作，适用于大部分消毒方式
2，采样流量：100L/min±5%
3，采样周期调节范围：1-6000L(可调)
4，撞击速率：10.8m/s（安德森撞击等级第五级原理）
5，电池使用时间：8小时以上
6，外形尺寸：130*130*160mm (W*D*H)重量：1.8Kg
7，执行标准：ISO 14698-1/2，GB/T 16293-2010
三、浮游菌采样器使用条件：
1．正常大气压
2．温度10℃-35℃相对湿度10%RH-90%RH
3．电源AC220VDC16.8V
FKC-I Microbial air sampler is a kind of high-efficiency multi-hole inhaled air sampler.It is designed in accordance with the principle of isokinetic sampling,It samplers directly and keeps wind speed of sampling basically consistent with that of clean room,so that reflecting the concentration of animalcule in clean room more accurately.When sampling ,the air with puffball will bump into the agar surface in culture dish through tiny holes swiftly.These animalcules grow quickly with the help of agar surface,thus the result will be obtained faster.
Operational Environment
| Temperature | 10–35℃ |
| Relative humidity | 10–90 percent RH |
| Atmospheric pressure | 80—110kPa |
| Maximum dust concentration | 100000000 particles/ m³@0.5µm or 0.2mg/m³ |
Feature and Parameter
| Sampling inlet has many tiny holes to reduce puffball superposition and error of animalcule count. | |
| Sampling flow | 100L/min |
| Inlet impact speed | 0.38m/s basically the same as the speed of clean room.
(isokinetic sampling) |
| Sampling quantity | can be set from 0.001—9.999m³ |
| Standard dimension of culture dish | Φ90*15 |
| Power supply | DC16.8V chargeable battery which can supply 4hours power |
| Dimension | Φ120*325 |
| Weight | 3.0kg |
Reviews
There are no reviews yet.